Watch this great step-by-step example of a 3D scan to 3D solid model process using the Verisurf Reverse Engineering Suite:
Scott KnocheApril 10, 2020
VIDEO - More Verisurf tools to make Reverse Engineering even easier
Daniel Caggiano - MarketingApril 26, 2019
VIDEO - Use Verisurf Feature Extraction to run offline inspection plans from pre-measured data
Daniel Caggiano - MarketingApril 26, 2019
VIDEO - Demonstration of data capture to solid, 3D CAD model workflow using only a PCMM contact probe.
Daniel Caggiano - MarketingFebruary 12, 2019
VIDEO - watch Verisurf generate a real-time, color scan using a FARO 8-axis Quantum ScanArm:
Daniel Caggiano - MarketingOctober 25, 2018
Tackle impeller/propeller reverse engineering easily in Verisurf with these useful guidelines:
Daniel Caggiano - MarketingMay 30, 2018
When reverse engineering ports, it is a common practice to place evenly-spaced CAD planes perpendicular to a “drive curve”. Here's how:
Daniel Caggiano - MarketingApril 3, 2018
Verisurf features several methods for using identical inspection locations for any subsequent inspection - regardless of measurement equipment used. Learn these methods here:
Daniel Caggiano - MarketingMarch 28, 2018
Take advantage of Verisurf's Best Fit capabilities when using a CAD model for nominal reference while inspecting hole patterns to positional GD&T specs:
Daniel Caggiano - MarketingMarch 19, 2018
