Technical Articles Archives - Page 11 of 14 - 3D Metrology Software, Training and CMMs

Flatten Mesh to Flat Pattern

Flatten Mesh creates flat pattern 2D meshes from 3D open meshes:

Scott KnocheDecember 9, 2022

The FARO Arm with Verisurf Software

The FARO Arm with Verisurf Software The FARO arm portable coordinate measuring machine (PCMM) is a measurement device that has provided reliable and essential service…

Scott KnocheApril 21, 2022

Metrology Guides Technical Articles

What is a CMM?

What is a CMM? The CMM (coordinate measuring machine) is a measurement system designed for precise verification and documentation of manufactured parts and assemblies. It…

Scott KnocheJanuary 8, 2024

General Technical Articles

Verisurf Solid Sweep Features

Recent releases of Verisurf have implemented some big improvements to the Sweep function for solid modeling:

Scott KnocheAugust 11, 2020

News Technical Articles

Right on Your Desktop

Take a few minutes to familiarize yourself with Verisurf's set of Reference Guides to get the answers you need quickly:

Scott KnocheDecember 3, 2020

Applications News Technical Articles Videos

Reverse Engineering Benchmark

Watch this great step-by-step example of a 3D scan to 3D solid model process using the Verisurf Reverse Engineering Suite:

Scott KnocheApril 10, 2020

Reporting Technical Articles

Tech Tip: Using Datum Reference Frames

Create new alignments fast using existing feature data:

Marketing TeamAugust 6, 2019

Applications Devices Technical Articles

Tech Tip – Mirror Measurement with a Laser Tracker

Best practices for measuring single point circles and 2-point slots with Verisurf:

Marketing TeamMay 3, 2019

Applications General Technical Articles Videos

Feature Extraction

VIDEO - Use Verisurf Feature Extraction to run offline inspection plans from pre-measured data

Marketing TeamApril 26, 2019

Applications General Technical Articles Videos

Slice & Export to Edge Splines

VIDEO - More Verisurf tools to make Reverse Engineering even easier