Skip to main content

Software Highlights

Measuring Slots of Varying Types


Obround (default), Rectangle, and Square type slots are supported in Slot Measure Settings.

  • Obround is the default standard Slot.
  • Rectangle – length is greater than the width.
  • Square – all sides are equal.
  • Obround Slots can be measured/calculated by measuring two arcs.

Fit Methods include Least Squares, Maximum Inscribed, and Minimum Circumscribed.

Measure Slot Pattern and Probe Compensation
Outside Diameter, None, Inside Diameter

For more information or a demonstration on this or other

Software Highlights

Contact Us