; ; Inspection - Verisurf News & Events

2D Drawings and 3D Inspection Come Together at CONTROL 2016

2D Drawings and 3D Inspection Come Together at CONTROL 2016Verisurf® and InspectionXpert® Demonstrate Integrated Solution Stuttgart, Germany, April 21, 2016Verisurf Software, Inc. and InspectionXpert Corporation will be presenting an integrated solution together with InspectionXpert’s European partner K2D-KeyToData GmbH, at CONTROL 2016, Stuttgart Exhibition Centre, Hall 1, Booth 1000. The integrated solution lets customers choose between using 2D drawings or 3D CAD models to effectively produce and implement automated 3D measurement plans and first article inspection reports.The solution is made possible by the processing logic and flexibility of both Verisurf S...

Read Full Article


Quality Inspection and the CAD Connection

Printed courtesy of Advanced Manufacturing.org  Copyright © 2016 by SME MODERN MANUFACTURING PROCESSES, SOLUTIONS & STRATEGIESModern manufacturing is rapidly adopting model-based definition (MBD).  When employing an MBD strategy, the CAD model becomes more than the nominal to which all parts are measured and inspected against.   MBD keeps the all-important digital thread intact - from design to manufacturing to inspection and quality reporting. Everything that defines the part exists in a single digital archive, including how to manufacture and inspect the part. Comprehensive deployment of MBD in manufacturing can go far beyond this to complete Pr...

Read Full Article


3-D Model-Based GD&T for Inspection

Printed courtesy of Quality Magazine   Copyright ©2015. All Rights Reserved BNP Media The central concept behind model-based definition (MBD) is that the digital model contains all of the detailed information necessary for all aspects of the product life cycle. This includes everything from design to manufacturing, in particular, GD&T data.When the digital model is the authority it removes ambiguity, conflict and doubt that arises when drawings and models co-exist. When the 3-D model is the authority, MBD eliminates errors that result from referencing incorrect sources and makes processes more efficient.There is a common misconception that MBD is synon...

Read Full Article


3-D Model-Based GD&T for Inspection

The central concept behind model-based definition (MBD) is that the digital model contains all of the detailed information necessary for all aspects of the product life cycle. This includes everything from design to manufacturing, in particular, GD&T data.When the digital model is the authority it removes ambiguity, conflict and doubt that arises when drawings and models co-exist. When the 3-D model is the authority, MBD eliminates errors that result from referencing incorrect sources and makes processes more efficient.There is a common misconception that MBD is synonymous with GD&T. In some circles, using GD&T on a model is incorrectly considered to be M...

Read Full Article


Verisurf Automates SLS Rocket Panel Inspection

Watch the Video   AMRO Fabricating chooses Verisurf software to automate the production inspection of NASA SLS rocket panels.In space flight the first eight minutes are critical; this is when the greatest opposing forces of thrust and gravity are impacting the launch vehicle.  The new NASA Space Launch System (SLS) will weigh 5.5 million pounds at liftoff, or roughly the weight of eight fully loaded 747 jets.   Everything comes down to weight and the integrity of design and fabrication to insure success.  Today, it costs $10,000 to send one pound of payload into orbit; since the entire launch vehicle makes the tripe to low earth orbit its net weig...

Read Full Article