Laser Projection

3D Laser Projection Technologies

Eliminate Hard Tooling and Templates with a Bright, Sharp, and Accurate Pattern of Light

Three dimensional (3D) laser projection is  accomplished by steering a single beam of laser light accurately through a series of specific points in 3D space.  This is accomplished by directing a laser beam at a pair of mirrors that are powered by computer controlled servo motors which are capable of extremely rapid movement.  The effect that is produced is a highly visible glowing three dimensional template that can used as a location guide during a manufacturing process.

VERISURF supports LPT, Assembly Guidance and Virtek laser projection systems.

Laser Projectors can be used for Non-Contact Vision Inspection and Visual 3D Pattern Guidance for Manufacturing Processes, here are some of the many possible applications.

Composite Fabrication

• Laser Imaging Templates

• Composite Lay Up

• Tool Building and Assembly

• Instructional User Lay Up Guidance 

• Visual Inspection of Profiles

• Non-Contact Feature Recognition

• Laying Out Lines for Scribing Tooling

Manufacturing Applications

• Drill Holes in skins and frame sections

• Mark lines for Edge of Part Trimming

• Mark Lines on sub-assemblies for 3D part placement

• Blind Drilling

• Paint Mask

• Sticker Placement

• Replacement of spray dot templates

• Chemical mill marking for skin sections

Features and Benefits

• Reduces cost

• Speeds manufacturing cycle time

• Eliminates costly templates and hard tools

• Reduces inventory and maintenance of hard tools

• Increases manufacturing flexibility

• Increased accuracy

Copyright © 2008 Verisurf Software, Inc.

Last modified: April 02, 2008